SymbianOS 9.2 Hacking

Download ActivePython and install.

Download and install PySerial.

Download and install AppTRK (in your Handphone).

Download Hack Perms.

After that, follow tutorial below:

Connect your phone to your PC via USB in PC Suite mode.

Go to Control Panel>System>Hardware>Device Manager>Ports OR in Windows Vista it's Control Panel>Hardware and Sound>Device Manager>Ports.



Once you're there, look for your phone, in my case it's called 'Nokia GSM Phone USB (COM3)'. Make a note of the number after COM, you'll need it later.

Open AppTRK on your phone and press cancel when it trys to connect via bluetooth. Go to options>settings>connection and change it to USB. Go back and press options then connect. This is what you should see:


Now open up the Hack Perm python file in notepad on your PC, press CTRL+F on your PC and search for "ser =" (Without quotation marks, of course). Once you're there change the 5 that's in the brackets to the 1 less than the number that followed COM in the step above.


For example, if your number was 7, you would change the number in the brackets to 6 and if your number was 5, you would change the number in the brackets to 4. Once you've done that, save the python file (JUST SAVE, NOT SAVE AS).

Once you have done this, just double click the Hack Perms file and wait for about 5 seconds, during this time, you should see this, notice the "!!!!!!!!!!!candidate!!!!!!!!!!!", this shows you've been successful:




Now to make the hack computer-free:

Download THIS file and copy the contents to a folder in your phone.

1) Using your file manager of choice copy the CProfDriver_SISX.ldd file into C:sysbin.
2) Install CapsOn and then install CapsOff.

That's it! Whenever you want to run the hack just select CapsOff and the hack will be working! No need for a computer! If for some reason you want to turn off the hack just select CapsOn... Yes, it really is THAT EASY.


DONE!

Things to note:

1)I will not be held responsible for anything happening to your phone. Nothing bad should happen anyway.

3)This hack has been confirmed on the N95, N95 8GB, N82 and some others. If you perform this hack, please tell me your phone model.


Don't forget to check out how to install unsigned apps here.

Here's to a bright future for the now truly open S60!

DB2012 CID52 Unlock Procedure (FLASH Method)

This unlock procedure must be used if you don´t have RESTORE file for your phone´s SW version, and can´t get it, or in any other untypical situation. This steps should work with all DB2012 CID52 phones, but for this description, i´ve used a W200i phone. To apply in another models, just use appropriate files (Drivers and MAIN+FS) for desired phone.
BYPASS/CSCA)", "ENABLE ALTERNATIVE SECURITY BYPASS", "COMPLETE PHONE AFTER FLASH" and "UNLOCK AFTER FLASH" options.


4 - Now go to "Sony Ericsson" tab, select correct phone model and press "Identify". Attach turned off phone to USB cable and hold "C" key. Verify SW version installed on phone, CID version and check the provider that the phone is locked to (in this example, phone is locked to 724-05 Claro Br provider), because your will need to use an accepted SIM or a Test SIM during this process. Before continue, please take care with this advertise:


Quote:
Originally Posted by The_Laser
Precautions:
please take care that there is NO (at least, i can't get) cid52 firmwares for following db2010 phones:

k310,k510,w810,z530,z550

luckily, k310,k510 can be flashed with w200 firmware, so we can always return them to original state.

but it is NOT related to w810,z530,z550 phones.
cause there is no firmwares, we can't recover them in case of error.

because of that, one mistake with that phones - and you get deadweight.
you have been warned.

5 - Go to SETool support area and download appropriate SW version for your phone. If you can´t locate exactly version, use highest version possible. Double check CID file version. It must be CID 52. Now, press "Add" button and add MAIN and FS files. You can also use "Custpacks" if you need.

6 - Press "Flash" button and attach turned off phone to USB cable, holding "C" key. Phone will be detected and flash procedure will starts.



7 - When prompted, disconnect phone, insert an accepted SIM card (in this example, a Claro Br SIM) or Test SIM, turn it on and continue holding "C" key during powering process.

8 - When phone is fully turned on, attach it to USB cable. Phone will be found by SETool SW and unlock process will continues.

9 - SETool SW will write MAIN and FS files to phone, than will start unlock procedure.

10 - In the end, if everything goes fine, you will receive "Phone detached, Elapsed Time" message. You phone is now ready to work with any provider´s SIM card.


*Copy Paste From TechGSMNet Forum

Malsingmaps (March 2008) v2.23 All-In-One GOLD VERSION

1. Download "March2008 Malsingmaps v2.23 All-In-One-GOLD VERSION: http://www.mediafire.com/?9ll1e9de0qy
2. Download "The Keygen": http://www.mediafire.com/?1q2dnniywxg or from the attachment in this post
3. Use Maps ID = 5061 and Maps ID = 5062
4. Generate the key using your card ID as well as the Maps ID and save it in gmapsupp.unl and place in your /garmin folder together with the map. (See Below)

Note: You need to generate the key TWO times, one time for 5061 and one time for 5062.

Click Read More for full post.

ach key is 25 characters long, so for the first key (using Maps ID 5061) if you get "abcdefghijklmnopqrstuvwxy" and if the second key (using Maps ID 5062) you get "0123456789abcedefghijklmn"

You have to combine both keys to form a 50 characters key, so it would be "abcdefghijklmnopqrstuvwxy0123456789abcedefghijklm n" (without the quotes) and save it as gmapsupp.unl.

It works for my N82

Maps
This package consist of only Singapore and Malaysia maps.



Courtesy of musangpulut

Download Keygen HERE

China Phone Repair Guide

Here i got some tips for repairing china phone.

China Phone Repair Guide


Quickpost this image to Myspace, Digg, Facebook, and others!

Click HERE to download

Bypass Symbian Signed & Install UnSigned SISXJ2ME Midlets on Nokia S60 v3

Here is some breaking news for Nokia S60 mobile users. The very much frustrating Symbian Signed security platform v9.2 has been exposed to hacks. No longer do you need to use tools such as SignSIS & DevCertRequestControl to get a certificate for installing applications. Users can now bypass the Symbian Signed certification check and install any unsigned or self-signed applications or software.

When installing native Symbian OS packages (.SISX files) onto a Nokia S60 mobile device, the code performing the installation (the Software Installer, sometimes referred to as SWI) first reads the settings in a policy file in the ROM (swipolicy.ini) to determine how the installation should proceed. Swipolicy.ini is configured by a device manufacturer prior to device shipping. On a phone, swipolicy.ini is located in z:\system\data\.

Click Read More to read full post.

This hack involves modifying the swipolicy.ini in the ROM image when you do a firmware upgrade using a HEX Editor and then re-flashing the device with the altered permissions. You can read all about it at the Symbaali blog.

Important Note: This hack is not for the faint hearted and is known to brick a few models that perform a CRC check. Anything that you do following the article below is at your own risk and responsibility.

+ First update your S60 mobile phone using the software update tool.

+ It will download the binary image to C:\Documents and Settings\All Users\Application Data\Nokia\Nokia Service Layer\A\nsl_service_module_00001\

+ Open the ROM image in a HEX editor such as WinHex

+ For Java J2ME midlets, look for the following text/string (can be found using search string midp2_rp.xpf near offset 0×2310000):

# midp2_rp.xpf
# Copyright (c) 2004-2005 By Symbian Software Ltd. All rights reserved.
# This file defines one possible interpretation of the MIDP2 Security RP security policy,
# but with a JTWIr1 compliant policy for untrusted MIDlet suites

FormatVersion: 1.0

# MIDlets in untrusted MIDlet suites need user permission before doing anything
DomainBindings: [UNTRUSTED]

FunctionGroupBinding: “Application Auto Invocation”
Permission: User
DefaultMode: Session
MaximumMode: Session
EndFunctionGroupBinding

FunctionGroupBinding: “Landmark”
Permission: User
DefaultMode: Session
MaximumMode: Session
EndFunctionGroupBinding
[…]

+ Change MaximumMode field for each permission you want to add such as Application Auto Invocation, Landmark, Local Connectivity, Messaging, etc to Blanket. If you want, you can also change the DefaultMode to Blanket and save the image.

+ Now run the software update again and it should re-flash the S60 device with your new, unrestricted permissions. You can test if the hack was successful by installing a Java J2ME midlet. You should see more permission options in the application manager (Select the midlet and Click Open).

+ For Nokia S60 SISX files, locate the swipolicy.ini in the ROM image (can be found using search string UserCapabilities, near offset offset 28251550):

AllowUnsigned = false
MandatePolicies = false
MandateCodeSigningExtension = false
Oid = 1.2.3.4.5.6
Oid = 2.3.4.5.6.7
DRMEnabled = true
DRMIntent = 3
OcspMandatory = false
OcspEnabled = true
AllowGrantUserCapabilities = true
AllowOrphanedOverwrite = true
UserCapabilities = NetworkServices LocalServices ReadUserData WriteUserData UserEnvironment
AllowPackagePropagate = true
SISCompatibleIfNoTargetDevices = false
RunWaitTimeoutSeconds = 600
AllowRunOnInstallUninstall = false
DeletePreinstalledFilesOnUninstall = true
AlternativeCodeSigningOID = 1.3.6.1.4.1.94.1.49.1.2.2.1 1.3.6.1.4.1.94.1.49.1.2.2.5
PhoneTsyName = phonetsy

+ Next you need to download a free dd tool for windows such as one from here

+ Then extract the original text using dd by running the following command:

dd if=phonemodel.C01 of=filename.txt skip=28251550 bs=1 count=648

+ Remember to replace if, skip and count variables with the values of your own ROM image. The count variable is the size of the swipolicy.ini in your flash ROM image starting from AllowUnsigned till phonetsy.

+ Open the filename.txt and edit the UserCapabilities with

AllFiles DiskAdmin NetworkServices LocalServices ReadUserData WriteUserData ReadDeviceData WriteDeviceData UserEnvironment PowerMgmt MultimediaDD TrustedUI ProtServ NetworkControl SwEvent Location SurroundingsDD CommDD

As per one of the comments, you can also set UserCapabilities = All to include the full capability-set.

Ensure that the swipolicy.ini fragment matches the original byte count size that you had earlier. If it is more in size, you may have to remove some non-important attribute such as Oid = 1.2.3.4.5.6 at your own risk to ensure that the byte count matches. Hint: check the size of filename.txt in Windows explorer before importing.

+ Import the filename.txt back into the ROM image by running the following command:

dd if=filename.txt of=phonemodel.C01 seek=28251550 bs=1 count=648

Again remember to replace the of, seek and count variables for your ROM.

+ Now re-flash your mobile phone with NSU as you did earlier. You will find more functionalities that you don’t even get with a developer certificate.

After your phone is unlocked, you can add the AllFiles capability to Y-Browser that enables you to browse and view system and private files on your smartphone’s mobile file system.

HTC P3450 Direct Sim Unlocking

Enjoy Free Unlimited Unlocking HTC TOUCH P3450..

No need to pay anymore..Remember it is freee......

Click Read More for full details

1. Connect your Phone and establish Activesync Connection.
2. Install 'Cert_SPCS.cab' and 'EnableRapi.cab' on your device.( Copy them to your devide and run).
3. Run 'Touch_Unlock.exe'.
4. Open the file 'Unlock_result.exe' generated upon execution with Hex Editor.
5. The eight-character code beside the IMEI number in the file is your Unlock code.

Enjoy !!

Download Here